• Before configuring WiFi cloud monitoring, please correctly install the micro inverter and make it work normally.
• This micro inverter is a grid tie inverter. Please pay attention to the danger of electric shock.
• The micro inverter will generate heat during power generation. Please pay attention to high temperature scald.
• You must have a smart device (smart phone or tablet) with Bluetooth function and Android or IOS system.
• You must have a wireless network device (such as a wireless router) that can provide WiFi and Internet service.
• Please turn on the Bluetooth function of the smart device first before configuring WiFi cloud monitoring.
• Your smart device must use the same WiFi network as the micro inverter to be configured.
• Please install the WiFi antenna of the micro inverter before configuring and using WiFi cloud monitoring.
• Please ensure that the straight-line distance between the wireless network equipment (such as wireless router)
providing WiFi network and the micro inverter shall not exceed 20m, and there shall be no or few obstructions.
• Please ensure that your smart device can connect to wireless network devices and access the Internet in the
same location of the micro inverter.
1. Please install the micro inverter correctly and make it work normally to generate power.
2. Please use a smart device (smart phone or tablet) to scan the right QR code (you can also use "Android App Store" or "Apple App Store" search for "Smart Life") download and install the "Smart Life" App correctly.
3. Turn on the Bluetooth function of your smart device.
4. Check that your wireless network device (such as wireless router) is working properly and connected to the Internet.
5. Use your smart device ("Smart Life" App installed) at the installation location of micro inverter to connect to the wireless network device and test if you can access the Internet normally. If you can access the Internet normally, please read the configuration and use steps on the next page to start configuration and use.
Multiple Kinds of Connecting Ways
120V/230V
Single Phase/Split Phase/Three Phase
Can meet all needed from Customers
| Type |
Micro On Grid Tie Inverter |
| Rated Power |
300-1500W |
| AC Output |
Single/Split/Three Phase |
| Transformer |
High Frequency |
| Contorller |
MPPT |
| Warranty |
5 Years(10 years optional) |
Xiamen Panelroof PV Technology Co.,Ltd.
Xiamen Panelroof PV Technology Co., Ltd was established in Xiamen, the beautiful coastal city in south China. In order to provide best products and services, Xiamen Panelroof has invested a lot of capital in R&D to improve the skills and technologies of manufacturing and system design. Our R&D team are all senior experts in the photovoltaic industry, now Xiamen Panelroof had become a comprehensive high-tech enterprise specializes in solar system design, solar panel, solar bracket, solar inverter, energy storage battery manufacturing and sales. High quality and good services had earned us a high reputation from our customers and partners. We will keep searching and innovating and improving our design, products quality and customer service to expand our influence all over the world.
Q1. HOW TO DO when "Smart Life" App can't find the micro inverter to be added?
A1: Please check the following points. If you still can't find it after all the checks are normal, please long press the reset button for more than 5 seconds to reset. After the WiFi indicator light flashes blue again, use "Smart Life" App to reconfigure the network.
-Check if the WiFi status indicator of the micro inverter is in the "Green Flashing" state;
-Check if the Bluetooth function of your smart device is turned on;
-Check if the signal of the wireless network is good.
Q2: HOW TO DO if I have multiple micro inverters to configure?
A2: Please install all micro inverters properly and make them work normally to generate power, and then operate according to the configuration and use steps. App can search all inverters to be added at one time and configure them at one time.
Q3: HOW TO DO if the SSID of my WiFi network is changed or the password is changed?
A3: Please reconfigure the inverter according to the configuration and use steps.
Q4: HOW TO DO if the WiFi status indicator of the inverter goes out, but the device displayed on the app is not online?
A4: This means that you can connect to the wireless network device, but you can't connect to the cloud server. It means that your wireless network device can't connect to the Internet. Please check if your Internet is working properly.
Q5:The installation site of the inverter is temporarily not equipped with a router and no WiFi signal. How does App connect the inverter and detect if the inverter is working properly?
A5:You can use an idle smartphone to open the WiFi sharing of mobile phone signal hotspot for connection, and reconfigure the network connection after installing the router.
Q6: There are multiple WiFi signals on site. Can we connect with different WiFi signals?
A6: No, the WiFi connected of the micro inverter and the smart phone must be consistent before the network can be configured.
Q7: Can App configure the micro inverter in different places? Can I view data in different places?
A7: You can't configure the micro inverter in different places, but you can view data in different places. The inverter uploads the latest status data to the cloud server every minute.
Q8: After checking that there is no problem, App still cannot find the micro inverter?
A8: Please press and hold the inverter button for more than 5 seconds to reset the inverter. After the WiFi indicator flashes again, use App to reconfigure the network.
Q9: HOW TO DO if I want to monitor the same inverter on two or more smart devices?
A9: You can share the inverter with another phone using the share device feature.
Q10: Will App data be saved?
A10: Yes, App data will be stored on cloud server. After the network is successfully configured, you can view the data at any time and place.
Q11: The inverter cannot be connected to the app at night?
A11: At night, because the solar panel does not generate power, the micro inverter does not have any power input, so it will offline and it is impossible to re-configure the network at night.
Audited Supplier 
){kind=link}